Exam 400-151: CCIE Data Center v2.0 exam 400-151 exam torret guide materials

Exam 400-151

Quality and Value for the 400-151 Exam

Passleader Practice Exams for Cisco CCIE Data Center 400-151 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your 400-151 Exam

If you do not pass the Cisco CCIE Data Center 400-151 exam (CCIE Data Center Written Exam v2.1) on your first attempt using our passleader testing engine, we will give you a FULL REFUND of your purchasing fee.

Downloadable, Interactive 400-151 Testing engines

Our CCIE Data Center Written Exam v2.1 Preparation Material provides you everything you will need to take a Cisco CCIE Data Center 400-151 examination. Details are researched and produced by Cisco Certification Experts who are constantly using industry experience to produce precise, and logical.

• Comprehensive questions and answers about 400-151 exam
• 400-151 exam questions accompanied by exhibits
• Verified Answers Researched by Industry Experts and almost 100% correct
• 400-151 exam questions updated on regular basis
• Same type as the certification exams, 400-151 exam preparation is in multiple-choice questions (MCQs).
• Tested by multiple times before publishing
• Try free 400-151 exam demo before you decide to buy it in Passleader.com

More infoemation as for your reference:
https://www.testsimulate.com/400-151-study-materials.html


Free demo are as following:
NEW QUESTION: 1
Which two statements about ACI border leaf are true? (Choose 2)
A. The border leaves are ACI leaves that provide Layer 3 connections to outside networks.
B. Only 32 border leaves are supported in an ACI fabric
C. The border leaf can also be used to connect to compute, IP storage, and service appliances.
D. The border leaves are dedicated leaf switches that support only Layer 2 and Layer 3 out in an ACI
fabric.
Answer: A,C

NEW QUESTION: 2
Which three port types support port security in Nexus 7000? (Choose three)
A. vPC ports
B. trunk ports
C. Layer 2 and Layer 3 ports
D. access ports
E. SPAN destination ports
F. SPAN source ports
Answer: B,D,F

NEW QUESTION: 3
Which two guidelines and limitations of PTP on Cisco NX-OS are true? (Choose two)
A. PTP supports transport over UDP. Transport over Ethernet is not supported.
B. PTP can be enabled only on F - and M - Series module ports.
C. PTP supports multicast, unicast, and anycast communication
D. Only one PTP process can control all of the port clocks through the clock manager.
E. PTP is limitless per network
Answer: A,D

NEW QUESTION: 4
Which three editing optional of Cisco UCS Director workflow are valid? (Choose three)
A. Reorder inputs
B. change priority of a workflow
C. Edit tasks in the workflow
D. Rename a workflow
E. Change an input from mandatory to optional
F. Delete inputs
Answer: A,D,F

NEW QUESTION: 5
Refer to the exhibit.
Which purpose of the ipospf transmit-delay command is true?
A. This variable sends the OSPF database to the neighbors periodically after the time specified in the
transmit-delay command.
B. This variable is used to negotiate transmit -delay with the OSPF neighbors.
C. This variable adds a specified time to the age field of an OSPF update. This parameter has more
significance on very low-speed links.
D. This variable is used by the OSPF to send hello packets periodically after the time specified in the
transmit-delay command.
Answer: C

NEW QUESTION: 6
Which description of how to enable the Flex Flash Controller auto-sync function on the
B200M4 blade is true?
A. Enable auto-sync in the servers > inventory > storage subtab
B. Configure a local disk policy for FlexFlash
C. Configure a storage connection policy to use auto-sync
D. Configure a storage policy for FX3S
Answer: A
Explanation
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-
Guides/Storage-Mgmt/3-

NEW QUESTION: 7
How is the virtual IP for an ACI VPC domain assigned?
A. by DHCP using the infrastructure VLAN
B. by DHCP using the default management network
C. manually by the admin
D. No virtual IP is available for VPC peers on ACI
Answer: D

NEW QUESTION: 8
Which two statements about configuring the Intermediate System-to-Intermediate System
domain policy on an ACI Fabric are true? (Choose two)
A. The IS-IS LSP generation initial wait, maximum wait, and second wait intervals can all be configured
B. The IS-IS domain policy is configured under Fabric > Access Policies
C. The IS-IS domain policy is configured under Fabric > Global Policies
D. Cisco Nexus stitches do not have a concept of DR due to vPC
E. PIM exchanges unicast hello messages between all routers advertised by the anycast RP
F. PIM hello messages are sent to 224.0.0.13 and the router with the lowest priority is selected as the
DR
G. PIM hello messages are sent to 224.0.0.13 and the router with the highest priority is selected as
the DR
H. The IS-IS default MTU is set at 4352, and it cannot be changed
I. The IS-IS fast-flooding of link state packets improves IS-IS convergence time
Answer: A,I

NEW QUESTION: 9
Refer to the exhibit.
When adding an ASAv to the APIC, the user notices a fault raised on the device. Which cause of this
fault is the most likely?
A. The incorrect username and password was used
B. The configuration specified HTTP and not HTTPS
C. The configuration did not specify "apic" as the username
D. The device package was never uploaded
Answer: C

NEW QUESTION: 10
Which two types of traffic are consolidated using Cisco unified Fabric? (Choose two)
A. SAN storage traffic
B. network traffic
C. video traffic
D. voice traffic
E. InfiniBand traffic
Answer: A,B

NEW QUESTION: 11
Which three functions are Key characteristics of the data center access layer in a three-tier
architecture?
(Choose three)
A. provides connectivity to the servers
B. segment workgroups
C. must support routing protocols such as OSPF and BGP
D. provides connectivity to network based services (load balancer and firewall)
E. implemented in top-of-rack or end-of row topology
F. performs QoS marking
Answer: A,E,F

NEW QUESTION: 12
Drag and drop the MST Spanning Tree protocol standards from left onto the correct
characteristics on the right.
Answer:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx-
os/layer2/configuration/guide/Cisco_Nexu