Exam 200-125:

200-125 CCNA Practice Exam

ExSim-Max for Cisco 200-125 is Boson's practice exam for the Cisco CCNA® Routing and Switching certification exam. This exam simulation, also known as practice exam, software covers the concepts you need to know to pass the 200-125 CCNA exam. ExSim-Max for Cisco 200-125 includes well-written, technically accurate questions and answers, which compose three unique, full-length practice exams. This product is written and edited entirely by Boson's subject matter experts, and delivered by our exam delivery system, the Boson Exam Environment (BEE). The ExSim-Max for Cisco 200-125 exams simulate the difficulty and variety of question types on the real exam so closely that, if you can pass our CCNA practice exams, you will know that you are ready for the real exam.

This CCNA practice exam, like all ExSim-Max practice exams, comes with our No Pass, No Pay Guarantee, and is only available here at Boson.com.

Pass the 200-125 CCNA Exam with ExSim-Max

• Simulates the level of difficulty, question types and item distribution
• Contains well-written questions by subject matter experts
• Includes comprehensive explanations with detailed references
• Provides score reports to focus your study time
• Gives you the tools you need to pass the exam—guaranteed!

Relating useful exam dumps of exam 200-125:
https://www.testsimulate.com/200-125-study-materials.html


There are some free demo for you:
NEW QUESTION: 1
which value indicate the distance from the ntp authoritative time source?
A. Priority
B. Stratum
C. Location
D. layer
Answer: B

NEW QUESTION: 2
Which statement describes the effect of the exec-timeout 30 command?
A. The router disconnects the user session if it is inactive for 30 minutes.
B. The router maintains a user session indefinitely after it is active for 30 seconds.
C. The router maintains a user session indefinitely after it is active for 30 minutes.
D. The router disconnects a user session if it is inactive for 30 seconds.
Answer: A

NEW QUESTION: 3
DRAG DROP
Drag and drop the DNS lookup components from the left onto the correct functions on the right.
Answer:

NEW QUESTION: 4
DRAG DROP
Drag and drop the BGP terms from the left onto the correct descriptions on the right
Answer:
external BGP = peers are in different autonomous systems (AS)
internal BGP = peers are in the same autonomous systems
Autonomous System = separate network operating within one administrative domain Private
autonomous system (AS)= numbers which range from 64512 to 65535 Public AS = between 1 and
64511 Prefix = block of ip addresses

NEW QUESTION: 5
Which two design models can you use to deploy DMVPN? (Choose two)
A. DMVPN only
B. dual DMVPN
C. Internet VPN
D. DMVPN backup dedicated
E. DMVPN backup shared
F. WAN aggregation
Answer: A,B

NEW QUESTION: 6
which two statements about data vlans on access ports are true ?
A. Exactly one vlan can be configured on the interface
B. 802.1Q encapsulation must be configured on the interface
C. They can be configured as host ports
D. they can be configured as trunk ports
E. Two or more vlans can be configured on the interface
Answer: A,C

NEW QUESTION: 7
What is the simplest IP SLA operation that can measure end-to-end response time between
devices?
A. ICMP Jitter
B. ICMP path jitter
C. ICMP echo
D. ICMP path echo
Answer: A

NEW QUESTION: 8
Which port security violation mode allows traffic from valid mac address to pass but block
traffic from invalid mac address?
A. restrict
B. shutdown
C. shutdown vlan
D. protect
Answer: D

NEW QUESTION: 9
Which command should you enter to configure a DHCP client?
A. ip helper-address
B. ip dhcp pool
C. ip address dhcp
D. ip dhcp client
Answer: D

NEW QUESTION: 10
Which three are valid modes for a switch port used as a VLAN trunk? (Choose three.)
A. transparent
B. forwarding
C. blocking
D. auto
E. on
F. desirable
Answer: D,E,F
Explanation:
These are the different types of trunk modes:
ON: This mode puts the port into permanent trunk mode and negotiates to convert the link into a
trunk link. The port becomes a trunk port even if the adjacent port does not agree to the change.
OFF: This mode puts the port into permanent non-trunk mode and negotiates to convert the link into
a non-trunk link. The port becomes a non-trunk port even if the adjacent port does not agree to the
change.
Desirable: This mode causes the port to actively attempt to convert the link into a trunk link. The port
becomes a trunk port if the adjacent port is set to on, desirable, or auto mode.
Auto: This mode enables the port to convert the link into a trunk link. The port becomes a trunk port
if the adjacent port is set to on or desirable mode. This is the default mode for Fast and Gigabit
Ethernet ports.
Nonegotiate: This mode puts the port into permanent trunk mode, but does not allow the port to
generate Dynamic Trunking Protocol (DTP) frames. The adjacent port must be configured manually as
a trunk port to establish a trunk link.

NEW QUESTION: 11
Which statement about NTP is true?
A. The default authentication key number is 1.
B. The default source address of an NTP message is the interface connected to the next-hop for the
server peer address.
C. Each device is enabled as a server by default and propagates NTP messages to all peers on its
default LAN.
D. The default stratum number is 5.
Answer: B

NEW QUESTION: 12
Which command can you enter to display duplicate IP addresses that the DHCP server assigns?
A. show ip dhcp binding 10.0.2.12
B. show ip dhcp conflict 10.0.2.12
C. show ip dhcp database 10.0.2.12
D. show ip dhcp server statistics
Answer: A

NEW QUESTION: 13
A workstation has just resolved a browser URL to the IP address of a server. Which protocol
will the workstation now use to determine the destination MAC address to be placed into frames
directed toward the sever?
A. ARP
B. DHCP
C. HTTP
D. RARP
E. DNS
Answer: A

NEW QUESTION: 14
Which three statements about Syslog utilization are true? (Choose three.)
A. There are more Syslog messages available within Cisco IOS than there are comparable SNMP trap
messages.
B. The Syslog server automatically notifies the network administrator of network problems.
C. A Syslog server provides the storage space necessary to store log files without using router disk
space.
D. A Syslog server helps in aggregation of logs and alerts.
E. Enabling Syslog on a router automatically enables NTP for accurate time stamping.
F. Utilizing Syslog improves network performance.
Answer: A,C,D
Explanation:
The Syslog sender sends a small (less than 1KB) text message to the Syslog receiver. The Syslog
receiver is commonly called "syslogd," "Syslog daemon," or "Syslog server." Syslog messages can be
sent via UDP (port 514) and/or TCP (typically, port 5000). While there are some exceptions, such as
SSL wrappers, this data is typically sent in clear text over the network. A Syslog server provides the
storage space necessary to store log files without using router disk space.
In general, there are significantly more Syslog messages available within IOS as compared to SNMP
Trap messages. For example, a Cisco Catalyst 6500 switch running Cisco IOS Software Release
12.2(18)SXF contains about 90 SNMP trap notification messages, but has more than 6000 Syslog
event messages.
System logging is a method of collecting messages from devices to a server running a syslog daemon.
Logging to a central syslog server helps in aggregation of logs and alerts. Cisco devices can send their
log messages to a UNIX-style syslog service. A syslog service accepts messages and stores them in
files, or prints them according to a simple configuration file.
Reference: http://www.cisco.com/c/en/us/products/collateral/services/high-
availability/white_paper_c11-557812.html

NEW QUESTION: 15
which option is the correct CIDR notation for 192.168.0.0 subnet 255.255.255.252?
A. /32
B. /31
C. /30
D. /29
Answer: C

NEW QUESTION: 16
Which command should you enter to configure a device as an NTP sever?
A. ntp sever
B. ntp authenticate
C. ntp master
D. ntp peer
Answer: D
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/system_management/
503_n1_1/b_cisco_n5k_system_mgmt_cg_rel_503_n1_1/b_cisco_n5k_system_mgmt_cg_rel_503_n
1_1_c hapter_010000.pdf

NEW QUESTION: 17
Which two neighbor types are supported in a BGP environment? (Choose two)
A. internal
B. external
C. directly attached
D. autonomous
E. remote
Answer: A,B

NEW QUESTION: 18
Which networking Technology is currently recognized as the standard for computer
networking?
A. Open network architecture
B. System network architecture
C. Open system Interconnect
D. Transmission control protocol/Internet protocol
Answer: D

NEW QUESTION: 19
Which two actions must you take to configure a PAgP EthernetChannel between two
switches, S1 and S2? (Choose two.)
A. Configure thechannel-group 1 mode autocommand on S1.
B. Configure thechannel-group 1 mode activecommand on S2.
C. Configure thechannel-group 1 mode activecommand on S1.
D. Configure thechannel-group1 mode desirablecommand on S2.
E. Configure thechannel-group 1 mode oncommand on S2.
Answer: A,D

NEW QUESTION: 20
Scenario:
You are a junior network engineer for a financial company, and the main office network is
experiencing network issues. Troubleshoot the network issues.
Router R1 connects the main office to the internet, and routers R2 and R3 are internal routers.
NAT is enabled on router R1.
The routing protocol that is enabled between routers R1, R2 and R3 is RIPv2.
R1 sends the default route into RIPv2 for the internal routers to forward internet traffic to R1.
You have console access on R1, R2 and R3 devices. Use only show commands to troubleshoot the
issues.
Why applications that are installed on PC's in R2 LAN network 10.100.20.0/24 are unable to
communicate with server1?
A. A standard ACL statement that is configured on R2 is blocking the traffic sourced from Setver1
network.
B. A standard ACL statement that is configured on R1 is blocking the traffic sourced from Server1
network.
C. A standard ACL statement that is configured on R2 is blocking the traffic sourced from R2 LAN
network.
D. A standard ACL statement that is configured on R1 is blocking the traffic sourced from R2 LAM
network
Answer: A
Explanation:
Check the below now:

NEW QUESTION: 21
When is the most appropriate time to escalate an issue that you are troubleshooting?
A. when a more urgent issue that requires your intervention is detected.
B. when you have gathered all available information about the issue.
C. When you lack the proper resources to resolve the issue.
D. When you have been unable to resolve the issue after 30 min
Answer: D

NEW QUESTION: 22
If a host experiences intermittent issues that relate to congestion within a network while
remaining connected, which option could cause congestion on this LAN?
A. network segmentation
B. broadcast storms
C. multicasting
D. half-duplex operation
Answer: B

NEW QUESTION: 23
While troubleshooting a connection problem on a computer, you determined that the
computer can ping a specific web server but it cannot connect to TCP port 80 on that server. Which
reason for the problem is most likely true?
A. An ARP table entry is missing.
B. An ACL is blocking the TCP port.
C. A Route is missing
D. A VLAN number is incorrect.
Answer: B

NEW QUESTION: 24
When is a routing table entry identified as directly connected?
A. when the route is statically assigned to reach a specific network
B. when the local router is in use as the network default gateway
C. when an interface on the route is configure with an ip address and enabled
D. when the network resides on a remote router that is physically connected to the local router
Answer: C

NEW QUESTION: 25
Refer to the exhibit. Which option describes how SwitchA will handle the frame just received?
A. It will flood the frame out of all the ports except Fa0/3.
B. It will forward the frame out of port Fa0/6 only.
C. It will drop the frame.
D. It will flood the frame out all ports.
E. It will forward the frame out of portFa0/3 only.
Answer: B

NEW QUESTION: 26
Which task do you need to perform first when you configure IP SLA to troubleshoot a
network connectivity issue?
A. Schedule the ICMP echo operation.
B. Verify the ICMP echo operation
C. Enable the ICMP echo operation.
D. Specify the test frequency
Answer: C
 More information can find in https://www.testsimulate.com/200-125-study-materials.html